We provide full turnkey installations in any of the provided areas below, we have some of the industries highest and latest engineering technology in renewable energy, and due to our global group venture partners, international experience, with some of the world leading companies, we are able to deliver the highest level of mechanical, electrical, structural and civil engineering
+ Industrial Projects
We Develop and design all types of engineering projects, including high and low voltage electrical installations. Our designs are based on a energy optimization criteria and we have extensive experience executing all kinds of projects, some of them include:
At Ecens Engineering we apply and work with the most advanced and tested technologies available, and one of our main priorities is that all our installations & projects comply with the highest quality and environmental standards available.
Profit Wise Engineering with Minimum Environmental Impact….
+ Waste Installations USW - MSW - NHIW - CDW
Waste management is the collection, transport, processing or disposal, managing and monitoring of waste materials. The term usually relates to materials produced by human activity, and the process is generally undertaken to reduce their effect on health, the environment or aesthetics.
Waste management is a distinct practice from resource recovery which focuses on delaying the rate of consumption of natural resources. All wastes materials, whether they are solid, liquid, gaseous or radioactive fall within the remit of waste management
Recycling is a resource recovery practice that refers to the collection and reuse of waste materials such as empty beverage containers. The materials from which the items are made can be reprocessed into new products.
Material for recycling may be collected separately from general waste using dedicated bins and collection vehicles, or sorted directly from mixed waste streams. Known as kerb - side recycling, it requires the owner of the waste to separate it into various different bins (typically wheelie bins) prior to its collection.
Waste to Energy - The energy content of waste products can be harnessed directly by using them as a direct combustion fuel, or indirectly by processing them into another type of fuel. Thermal treatment ranges from using waste as a fuel source for cooking or heating and the use of the gas fuel (see above), to fuel for boilers to generate steam and electricity in a turbine.
Ecens Engineering develops and designs Waste treatment Installations for the following areas:
Optionally we can also integrate and include in any of our waste management installations a WASTE TO ENERGY system which will enable, not only a fully functional ecological auto powered Installation, but a method of energy production for other purposes.
Ecens Engineering also develops and designs specific projects and integrated installations for HCW ( Healthcare Waste Management ) with multiple options depending on existing space and specific needs.
BIOMASS, as a renewable energy source, is biological material from living, or recently living organisms. As an energy source, biomass can either be used directly, or converted into other energy products such as biofuel.
In the first sense, biomass is plant matter used to generate electricity with steam turbines & gasifiers or produce heat, usually by direct combustion.
Examples include forest residues (such as dead trees, branches and tree stumps), yard clippings, wood chips and even municipal solid waste.
In the second sense, biomass includes plant or animal matter that can be converted into fibers or other industrial chemicals, including biofuels.
Industrial biomass can be grown from numerous types of plants, including miscanthus, switchgrass, hemp, corn, poplar, willow, sorghum, sugarcane, and a variety of tree species, ranging from eucalyptus to oil palm (palm oil).
BIOMASS is carbon, hydrogen and oxygen based. Biomass energy is derived from five distinct energy sources: garbage, wood, waste, landfill gases, and alcohol fuels. Wood energy is derived by using lignocellulosic biomass (second generation biofuels) as fuel.
WASTE TO ENERGY is the second largest source of biomass energy. The main contributors of waste energy are municipal solid waste (MSW), manufacturing waste, and landfill gas.
+ Energy from Waste
Waste to Energy (WtE) or Energy from Waste (EfW) is the process of creating energy in the form of electricity or heat from the incineration of waste source. WtE is a form of energy recovery.
Most WtE processes produce electricity directly through combustion, or produce a combustible fuel commodity, such as methane, methanol, ethanol or synthetic fuels
Gasification is a process that converts organic or fossil based carbonaceous materials into carbon monoxide, hydrogen and carbon dioxide.
This is achieved by reacting the material at high temperatures (>700 °C), without combustion, with a controlled amount of oxygen and/or steam.
The resulting gas mixture is called syngas (from synthesis gas or synthetic gas) or producer gas and is itself a fuel.
The power derived from gasification of biomass and combustion of the resultant gas is considered to be a source of renewable energy
Ecens Engineering Delivers a new proprietory Waste to Energy technology which not only effectively REDUCES:
And also delivers:
+ Cogeneration & Trigeneration
COGENERATION (also Combined Heat and Power, CHP) is the use of a heat engine or a power station to simultaneously generate both electricity and useful heat.
All thermal power plants emit a certain amount of heat during electricity generation. This can be released into the natural environment through cooling towers, flue gas, or by other means.
By contrast, CHP captures some or all of the by-product heat for heating purposes, either very close to the plant, or — especially in Scandinavia and eastern Europe — as hot water for district heating with temperatures ranging from approximately 80 to 130 °C. This is also called Combined Heat and Power District Heating or CHPDH. Small CHP plants are an example of decentralized energy.
TRIGENERATION or CCHP (combined cooling, heat and power) refers to the simultaneous generation of electricity and useful heating and cooling from the combustion of a fuel or a solar heat collector.
The supply of high-temperature heat first drives a gas or steam turbine powered generator and the resulting low-temperature waste heat is then used for water or space heating as described in cogeneration. Trigeneration differs from cogeneration in that the waste heat is used for both heating and cooling, typically in an absorption chiller.
CCHP systems can attain higher overall efficiencies than cogeneration or traditional power plants.
+ Onshore Wind Farms
A WIND FARM is a group of wind turbines in the same location used to produce electric power.
A large wind farm may consist of several hundred individual wind turbines, and cover an extended area of hundreds of square miles, but the land between the turbines may be used for agricultural or other purposes. A wind farm may also be located offshore.
Onshore turbine installations in hilly or mountainous regions tend to be on ridgelines generally three kilometers or more inland from the nearest shoreline. This is done to exploit the topographic acceleration as the wind accelerates over a ridge.
The additional wind speeds gained in this way can increase energy produced because more wind goes through the turbines.
The exact position of each turbines matters, because a difference of 30m could potentially double output. This careful placement is referred to as 'micro-siting'.
+ PV Installations
Photovoltaics (PV) is a method of generating electrical power by converting solar radiation into direct current electricity using semiconductors that exhibit the photovoltaic effect.
Photovoltaic power generation employs solar panels composed of a number of solar cells containing a photovoltaic material. Materials presently used for photovoltaics include monocrystalline silicon, polycrystalline silicon, amorphous silicon, cadmium telluride, and copper indium gallium selenide/sulfide.
Due to the growing demand for renewable energy sources, the manufacturing of solar cells and photovoltaic arrays has advanced considerably in recent years.
Photovoltaics are best known as a method for generating electric power by using solar cells to convert energy from the sun into a flow of electrons. The photovoltaic effect refers to photons of light exciting electrons into a higher state of energy, allowing them to act as charge carriers for an electric current.
+ Solar Thermal Power
Solar thermal energy (STE) is an innovative technology for harnessing solar energyfor thermal energy (heat). Solar thermal collectors are classified by the United StatesEnergy Information Administration as low-, medium-, or high-temperature collectors.
Low - Temperature collectors are flat plates generally used to heat swimming pools.
Medium - Temperature collectors are also usually flat plates but are used for heating water or air for residential and commercial use.
High - Temperature collectors concentrate sunlight using mirrors or lenses and are generally used for electric power production.
Solar Hybryd Technology System is a electrical generation tecnology that provide the most reliable, cost-efective , enviromentally beneficial solution available, these key advantanges are:
MODULAR - Configured compact base units, that are connectable offering scalable utility-grade power for both on-grid and stand alone applications.
HYBRYD - A system is capable of working around the clock, even at night and in heavy cloud coverage, using alternative fuels to continue powering the micro turbine. Quick response heat augmentation by fuel burners provides constant heat input to the turbine, maintaining grid stability by supplying solar power or by slowly minimizing the power generated by the turbine.
ALTERNATIVE FUELS - Whether powered by the sun or by alternative fuels such as diesel, natural gas, LNG, bio gas and bio fuel, the system produces heat energy that can be used for heating, cooling (absorption chillers), hot air/water for industrial and domestic processes, dehumidification of bio-waste and desalination.
WATER USAGE - Water can be scarce in locations with abundant sunlight, so every drop counts. Unlike other solar thermal systems that use steam to drive large turbines, this system uses hot air to power microturbines, requiring just 8% of the amount of water that CSP steam technologies consume. The water that the system uses cools turbine intake air above 35°C.
+ Isolated Energy
Stand Alone Networks are systems were Isolated energy is needed in places where there is no connection to the general electricity distribution network.
These installations can be conceived with different elements and technologies:
Aerogenerators Hybrid systems: Wind+Photovoltaic
Generally the use of gel batteries, Maintenance free
REGULATOR / INVERSE CHARGE
Accumulates & conditions the produced current for direct consumption or battery storage
These solutions are suitable for:
Solar pumping systems
Telecommunication and signaling equipment
+ Efficient Building
Green Construction or Sustainable Building refers to a structure and using process that is environmentally responsible and resource-efficient throughout a building's life-cycle: from siting to design, construction, operation, maintenance, renovation, and demolition. This requires close cooperation of the design team, the architects, the engineers, and the client at all project stages.
The Green Building practice expands and complements the classical building design concerns of:
Although new technologies are constantly being developed to complement current practices in creating greener structures, the common objective is that green buildings are designed to reduce the overall impact of the built environment on human health and the natural environment by:
+ Energy Efficiency
Energy Efficiency is the set of actions and measures which are directed to enhance and rationalise the use of energy required to provide products and services.
There are various different motivations to improve energy efficiency. Reducing energy use reduces energy costs and may result in a financial cost saving to consumers and industries if the energy savings offset any additional costs of implementing an energy efficient technology.
Reducing energy use is also seen as a key solution to the problem of reducing emissions.
According to the International Energy Agency, improved energy efficiency in buildings, industrial processes and transportation could reduce the world's energy needs in 2050 by one third, and help control global emissions of greenhouse gases.
Energy efficiency and Renewable energy are said to be the twin pillars of sustainable energy policy. In many countries energy efficiency is also seen to have a national security benefit because it can be used to reduce the level of energy imports from foreign countries and may slow down the rate at which domestic energy resources are depleted.